Back Box Installation - Martin Logan Statement 40XW Manuel D'installation

STEP 3: BACK BOX INSTALLATION
3a With the correct orientation pointing upwards, lift the
back box and seat it into the holes in the bottom bracket
spacer using the locating pins for alignment.
3b Carefully push the back box into the stud bay. Please
ensure the top bracket can sit flush against the studs just
like the bottom bracket. A helper should now hold the
back box in place to complete the next step.
3c While the back box is being held in place, ensure the top
bracket is seated down firmly on the top of the back box.
Then secure the bracket to the studs with (4) supplied
wood screws. Metal studs will require different
screws that are not included .
10