Painting The Speaker Grille - Martin Logan Statement 40XW Manuel D'installation

P s
ainting the Peaker
IMPORTANT! The Statement 40XW grille is packaged with the
driver assembly (STATE40XW) and not in the same packaging
as the install kit. The speaker includes an extra scrim.
1. Remove the grille from the speaker. A protective cloth
scrim is attached to the back of the grille with a low-tack
adhesive. Remove this scrim by gently pulling it away
from the grille and discard it.
g
rille
2. Paint the grille, being careful not to plug the holes.
Allow the paint to dry completely before proceeding.
IMPORTANT! For best results use a spray rather than a
brush or roller.
3. Gently press the new scrim into place before reinstalling
the speaker grille.
5