Screenshot Of Group Config; Matrix Config Button; Matrix Config Button Options; Screenshot Of Matrix Config - Chauvet VIP 5162 Signal Processor Mode D'emploi

Screenshot of
Group Config
Matrix Config
Button

Matrix Config Button Options

Area
DVI1
DVI2
VGA1
Screenshot of
Matrix Config
Page 42 of 140
The Matrix Config Button is for configuring the output from the signal processor. The signal
processor has one DVI only output that works only with a DVI device, and one DVI/VGA output that
works with either a DVI or a VGA device.
The VGA output can be used for a second preview monitor or for a recording device.
Note: a DVI to DVI and VGA Y-cable is not included.
Selections
Program
Preview
Sets the DVI only output to program, preview, or color bar.
Color Bar
Program
Preview
Sets the DVI device on the DVI/VGA output to program, preview, or color bar.
Color Bar
Program
Preview
Sets the VGA device on the DVI/VGA output to program, preview, or color bar.
Color Bar
4. Operation | Software Operation
Description
VIP™ 5162 Signal Processor User Manual Rev. 1