Switching And Effects Buttons; Menu Function Buttons - Chauvet VIP 5162 Signal Processor Mode D'emploi

Switching and
Effects Buttons
Menu Function
Buttons
Front Panel USB
Ports
Page 16 of 140
The switching buttons change the live output that is sent to the program screen. The switching
buttons are: <BLK>, <TAKE>, <TEST PATTERN>.
The effects buttons configure and activate the way the live output is replaced by the preview output
when the <TAKE> button is pressed. The effect buttons are: <FADE> and <WIPE>.
Button
<BLK>
<TAKE>
<FADE>
<TEST PATTERN>
<CUT>
<WIPE>
The <MENU> button enters the menu function tree at the top. The other menu function buttons are
shortcuts. For more information see
Button
<PIP>
<SCALE>
<PROGRAM>
<MENU>
<INF>
<OUT RES>
<LOAD>
<SAVE>
The USB ports read videos or pictures from a USB stick. USB 1 can be assigned to input 1 and USB
2 can be assigned to input 2.
Each of the USB ports are part of a group of ports that can be assigned to inputs 1 or 2.
However:
· The USB1 port can only be assigned to input 1.
· The USB2 port can only be assigned to input 2.
· The USB ports cannot be used if any one of the ports for the input group is assigned. For
example, if the CV2 port is assigned to input 1, the USB 1 port cannot be used.
See Input 1 Ports and
Switches the live output to black.
Switches the live output from the program screen to preview output on the
preview monitor, and switches the preview output from the preview monitor to
live output. Uses the selected effect and options.
Sets fade as the switching effect and accesses the fade effect options.
Enters into the menu system at the test pattern function.
Switches the live output from the program screen to preview output on the
preview monitor, and switches the preview output from the preview monitor to
live output. Does not use the selected effect and options: <CUT> will always
switch instantly and abruptly.
Sets fade as the switching effect; and accesses the fade effect options.
Menu Navigation
Puts the signal processor in picture-in-picture mode. See
more information about PIPI mode.
Accesses the scale function. See SCALE.
Accesses the program function. See PROGRAM.
Accesses the top of the menu tree. See MENU.
Displays current configuration information. See INF.
Accesses the output resolution function. See
Accesses the load function. See LOAD.
Accesses the save function. See SAVE.
Input 2 Ports.
3. Setup | Front Panel Buttons
Action
Buttons.
Action
OUT RES.
VIP™ 5162 Signal Processor User Manual Rev. 1
Set PIP Options, for