Group Config Button; Group Config Tabs And Options - Chauvet VIP 5162 Signal Processor Mode D'emploi

Group Config
Button

Group Config Tabs And Options

Section or
Tab
Tab
Basic
Section
Trigger
buttons 1
Output
Tab
USB Tab
Page 40 of 140
The Group Config Sub-tab is for configuring Inputs 1 and 2.
Tab or Values or
Option Option
CV3
CV4
DVI2
Input
Option
VGA2
SDI1
USB1
Input Format Option
Display
Live Video
Mode
Option
Freeze Frame
4:3
Aspect
16:9
Ratio
Normal
Neg
Output
timer polar
Pos
R
Brightness G
B
Sync
R
Color
G
Temp
B
Sync ON/OFF
Contrast 0–100
Saturation 0–100
Sharpen 0–100
default
Play Movie
Play Picture
Play Option
Play time
Set
Play Control
File List
USB Tab shows only if the Input Option has been set to USB.
Values
Sets the port assigned to Input 1.
For future use.
Sets Input 1 video to play.
Sets Input 1 video to freeze frame.
Sets the aspect ratio for Input 1.
Sets the polarity of the output timing clock to negative.
Sets the polarity of the output timing clock to positive.
0–100
Sets brightness levels for each color in the Input 1 image.
Synchronizes RGB brightness controls .
0–100
Sets color temperature for each color in the Input 1 image.
Synchronizes RGB color temperature controls.
Sets image adjustments for the Input 1 image.
Resets all brightness, color temperature, and image adjustments
back to default.
Sets movie or picture playback for the USB. USB plays or displays
MP4, MPEG1, MPEG2, RMVB, MJPG, JPEG, BMP, and PNG.
Sets the number of seconds a picture is shown when Play Picture us
selected.
Sets the picture play time..
Moves from video to video or image to image, pauses playback.
Lists the files on the USB.
VIP™ 5162 Signal Processor User Manual Rev. 1
4. Operation | Software Operation
Description