Rear Panel View; Rear Panel Inputs; Input 1 Ports; Input 2 Ports - Chauvet VIP 5162 Signal Processor Mode D'emploi

Rear Panel View

1 2 3 4 5 6
Input 1
Input 2
Ports
Ports

Rear Panel Inputs

Input 1 Ports

Input 2 Ports

VIP™ 5162 Signal Processor User Manual Rev. 1
7 8 9 10
Other Input Ports
Any one of these ports can be assigned to program/preview 1. These ports can only be assigned to
program/preview 1, and only 1 port can be assigned at a time. The USB port 1 on the front of the
signal processor is part of this group.
Number Input
1 CV1/SDI
2 DVI1/VGA1
3 CV2
Any one of these ports can be assigned to program/preview 2. These ports can only be assigned to
program/preview 2, and only 1 port can be assigned at a time. The USB port 2 on the front of the
signal processor is part of this group.
Number Input
4 CV3
5 DVI2/VGA2
6 CV4
The ports described above are part of 2 groups of ports that can be assigned to
program/preview 1 or program preview 2. However:
· The ports designated for input 1 can only be assigned to program/preview 1.
· The ports designated for input 2 can only be assigned to program/preview 2.
· Only 1 port from each group can be used at a time.
· None of the ports for a given input group can be used if the USB port for that group is
used. For example, if USB port 2 is assigned, nothing else can be assigned to
program/preview 2.
Connectivity Ports
Output Ports
Composite Video 1 OR Serial Digital Interface. This port can take either type of
input. It must be configured through the program function of the front panel
menu or through the Config Tab of the software interface. See
Mode Config Button.
Digital Video Interface 1 OR Video Graphics Adapter 1. This port can take
either type of input. It must be configured through the program function of the
front panel menu or through the Config Tab of the software interface. See
PROGRAM or Mode Config
Composite Video 2.
Composite Video 3.
Digital Video Interface 2 OR Video Graphics Adapter 2. This port can take
either type of input. It must be configured through the program function of the
front panel menu or through the Config Tab of the software interface. See
PROGRAM or Mode Config
included.
Composite Video 4.
3. Setup | Rear Panel View
Power Switch
Type
Button. Note: VGA to DVI adapter not included.
Type
Button. Note: VGA to DVI adapter not
Power In
PROGRAM or
Page 17 of 140