Operation; Front Panel Operation; Front Panel Configuration Buttons; Pip - Chauvet VIP 5162 Signal Processor Mode D'emploi

4. O
PERATION
The signal processor can be configured and operated by using the front panel buttons or by using the included CHAUVET®
software. This manual provides information for both methods.
This Operation section covers the following topics:
·
Front Panel Buttons: a description of the front panel buttons and what they do.
·
Front Panel Configuration Examples
the front panel.
·
Software Operation: a description of the software interface and how it works.
·
Software Configuration Examples
software.
Front Panel

Operation

Front Panel
Configuration
Buttons

PIP

st
1 Level
SETUP PIP MODE
SETUP SINGLE MODE

SCALE

1st level 2nd Level
H SIZE 0–xxxx
V SIZE 0–xxxx
H POS 0–xxxx
V POS 0–xxxx
RESET
NO/YES
CONFIG
Page 20 of 140
and

Front Panel Operation

and Software Operation
The front panel buttons provide access to the configuration menu and the operations control. Each
button has a label that indicates its function.
This Front Panel section covers the following topics:
· Configuration buttons that access the menu functions.
· Operation buttons that operate the signal processor.
Refer to the Front Panel View
The Menu Function buttons, and <TEST PATTERN>, <FADE>, and <WIPE>, access menu
functions for configuring the signal processor. The menu map below shows the access point of each
button.
The buttons for operating the signal processor are described in
Display
Finished! Starts Picture-In-Picture mode – shows Finished! when process is completed.
Finished! Starts Single-Picture mode – shows Finished! when process is completed.
3rd Level
0–xxxx
Sets the width of the selected live preview— xxxx is the maximum number of pixels.
0–xxxx
Sets the height of the selected live preview— xxxx is the maximum number of pixels.
Sets the horizontal position of the upper-left-hand pixel of the selected live preview— xxxx
0–xxxx
is the maximum number of pixels.
Sets the vertical position of the upper-left-hand pixel of the selected live preview— xxxx is
0–xxxx
the maximum number of pixels.
Returns the selected live output to the default size and position as set in Output Format or
NO/YES
Out Res.
Examples: examples of configuration and operation using
Examples: examples of configuration and operation using the
while using the menu maps.
Description
Description
VIP™ 5162 Signal Processor User Manual Rev. 1
4. Operation | Front Panel Operation
Front Panel Operation Buttons.