Construction And Function - Burkert TOP Control on/off 8631 Manuel D'utilisation

T D
ECHNICAL ATA

Construction and function

The TOP Control on/off serves to drive pneumatically actuated process valves. It may be combined with
various vbalve types from the Bürkert process valve range (see data sheets for types 2000, 2001, 2002,
2012, 2030, 2031, 2031K, 2652, 2655 and 2658).
TOP Control and process valve are connected by an adapter. This results in an integral system consisting
of repeater, actuator and valve function.
Various electrical and pneumatic connection variants are available.
Electrical connection module
Figure: Construction of the TOP Control on/off with cover removed
10 - 8631
Screw for adjusting the lower proximity switch
With AS interface control: Initiator 2 / Data bit D2
Screw for adjusting the upper proximity switch
With AS interface control: Initiator 1 / Data bit D3
Pilot valve
(3/2 or 5/2-way solenoid valve)
With AS interface control: Pilot valve / Data bit D0
Exhaust connection
(marked: 3)
Control connections (connected in
the factory)
Pressure supply connection
(marked: 1)
Board with connection terminal + LED
Grub screw