H.brake Lever - Quickie Pulse 6 BC Mode D'emploi

E N G L I S H
H. BRAKE LEVER
Disengage the brake lever when you need to manually push the chair.
(For example, in an emergency, or if batteries fail).
1. Do not disengage brake lever unless power to the chair is off.
2. With either one or both brakes released, the chair will not operate and the
battery charge indicator will flash 9 bars rapidly (if power to the chair is on.)
3. Be aware that the chair will not have brakes in the free-wheel position.
4. Make sure that the person pushing the chair has full control when brake lever
is disengaged.
1. Release brake lever to push the chair manually
a. The brake lever (A) is attached to the rear section of the motors located towards the
back of the chair.
b. Push the brake lever down.
2. Engage brake lever to drive the chair
a. The brake lever (A) is attached to the upper rear section of the motors located at the
back of the chair.
b. Pull the brake lever up.
WARNING
25
A
I X .
119832 Rev. A