Upholstery Fabric; Suspension; Wiring; M.power Seating - Quickie Pulse 6 BC Mode D'emploi

E N G L I S H
J. UPHOLSTERY FABRIC
1. Replace worn or torn fabric of the seat as soon as you can. If
you fail to do so, the seat may fail and cause you to fall. Worn
fabrics may increase the potential for a fire hazard.
2. Fabric will deteriorate with age and use. Look for fraying,
thin spots, or stretching of fabric at rivet holes. Replace fabric
as required.
3. Be aware that washing may reduce flame retardation of the
fabric.
K. SUSPENSION
The suspension system does contain Dry Natural
Rubber. The suspension, or any other component on the
chair, does not contain any latex based product. The
suspension components are enclosed and inaccessible to
the user.
L. WIRING
Never pull on cables directly. This can result in wires
breaking inside the connector or harness. To remove a
plug or connector, always grasp the plug or connector
itself. (See section XI for wiring diagram.)
M. POWER SEATING
1. Operation
• While driving this wheelchair in the tilted position use cau-
tion.
• Do Not attempt to operate any power seating option
while positioned on an incline.
119832 Rev. A
WARNING
WARNING
WARNING
(SC only)
WARNING
• Do Not attempt to operate any power seating option
while this wheelchair is in motion.
• Do not attempt to operate the power seating options
around children.
2. Drive Inhibit
This power chair is designed to automatically reduce driving
speed when the power seating is tilted more than 16°.
3. Pinch points
Pinch points may occur when operating the powered seating
options on this chair. Ensure all hands and body parts are
clear of all power seating components that may result in
pinch points before operating them.
4. Tilting Power Base with Push Handles
Do not attempt to tilt power wheelchairs by pulling down on
the push handles. Power wheelchairs have heavy bases. As
such, attempting to tilt a power wheelchair to traverse
obstacles can damage components in the seating system
and/or modular actuators.
5. Remain Clear During Power Accessory Operation
Please stay clear of any powered actuator while the compo-
nent is in motion. Sunrise power mechanisms move over
large ranges of travel. Users should be aware of their sur-
roundings while components are in motion.
6. Maximum User Weight
Do not exceed the weight capacity for your specific
chair/seating system configuration. Doing so could result in
premature failure or injury.
N. S.P .O.T.
(Single Power Option Tilt)
POWER ACCESSORY
The powered S.P .O.T. accessory for this chair has a maximum
user weight capacity of up to 300 lbs. Never exceed this
capacity while operating the powered actuator.
The powered S.P .O.T. should not be operated for more than
three minutes of continuous use. Doing so may shorten the
life of the powered S.P .O.T..
12
(SC only)
WARNING
WARNING
V I I .