Display; Keypad; Environment; Load Cell Excitation - Brecknell MS140/300 Mode D'emploi

2.2.3 Display

2.2.4 Keypad

2.2.5 Environment

2.2.6 Load Cell Excitation

Because more than one load cell can be used on a scale, the following are required for
the load cell set to be used with this indicator.

2.2.7 Communication

Mode
Baud Rate
Data Format
Protocol
Output Data
MS140/300 User Instructions
5-digit,7-segment, 0.625" (16mm) LCD
l
4 push button keys
l
Working temperature 5° to 35°C
Storage temperature -10°C to 70°C
Humidity ≤95% RH without condensation
Voltage 4.4VDC
Max. Current 55mA (can power 4-350 ohm loadcells)
Signal connection 4 or 6 lead with sense leads
Max Sensitivity 0.3mV/V to +3mV/V (must be fit to >0.2µV
Input Resistor ≥80 Ω
Output Resistor <10 KΩ
Full-duplex or only output mode can be selected
Selectable: 1200-2400-4800-9600-19200 bps
7 data bits, even or odd parity, 1 stop bit
8 data bits, non-parity, 1 stop bit
7 selected protocols (one compatible with NCI standard SCP-01)
gross weight, net weight, tare weight, indicator displaying weight, weighing unit etc.
display grad)
/
7