Overload Display; Backlight Lcd Display; Connection With A Pc; Install / Update The Usb Driver - Brecknell PS25 Mode D'emploi

2.4 Overload Display

When loading is at or over the maximum capacity (25lb : 5.2oz / 11.50Kg / 11490g), the
LCD display will show "-- -- ".:

2.5 Backlight LCD Display

When the PS25 is turned on, the backlight will turn on simultaneously for approximately
10 seconds. The backlight will turn off if there is no change in the display and turn back
on when weight is placed on the weigh platform.

2.6 Connection with a PC

The unit can automatically connect to a PC with the enclosed USB cable. Win 7 users
can just plug in the USB and the PC will search and download necessary driver to
operate the device. In case this does not happen, please follow below procedure to
download and install the driver.

2.6.1 Install / Update the USB Driver

Use the link below to access the USB Installation Guide. The document provides
detailed installation and basic operation procedure and setup.
http://www.brecknellscales.com/downloads/Installing%20335%20USB%20Driver.pdf
PS25 Postal Scale User Instructions 9