Brecknell MS140/300 Mode D'emploi page 33

Command: U<CR> (55h 0dh)
Changes units of measure (simulate UNIT key) and return scale status with new units,
The new measure unit should be allowed to use
<LF> U
1
Command: L<CR> (4ch 0dh)
If Hold function can be activated, it will enable/disable hold function (simulate HOLD key) and returns scale status.
<LF> H H H <CR><ETX>
1 2 3
Command: X<CR> (58h 0dh)
Power off the scale, just like press down the ON/OFF key to turn off the scale.
Command: all others
MS140/300 User Instructions
U <CR><LF> H H H <CR><ETX>
2 1 2 3
Unrecognized command
<LF>? <CR><ETX>
Table 6.4 Summary of Command and Response:
Command
ASCII HEX
W<CR> 57 0d Read scale weight:
<LF>^^^^^^^^U1U2 U3U4U5<CR><LF> H1H2H3 H4<CR><ETX>---over
capacity
?<LF>________U1U2U3U4U5<CR><LF> H1H2H3 H4<CR><ETX>---under
capacity
?<LF>-------- U1U2 U3 U4U5<CR><LF> H1H2H3 H4<CR><ETX>---zero-point
error
?<LF><p>W1W2W3W4W5<dp>W6U1U2U3U4U5<CR><LF>H1H2H3H4<CR
><ETX>---normal data
S<CR> 53 0d <LF> H1H2H3H4<CR><ETX>; read scale status
Z<CR> 5a 0d <LF> H1H2H3H4<CR><ETX>; simulate ZERO key
T<CR> 54 0d <LF> H1H2H3H4<CR><ETX>; simulate TARE key
U<CR> 55 0d <LF> U1U2 U3 U4U5<CR><LF> H1H2H3H4<CR><ETX>; simulate UNIT key
L<CR> 4c 0d <LF> H1H2H3H4<CR><ETX>; simulate HOLD key
X<CR> 58 0d power off the scale, simulate OFF key
others <LF>? <CR><ETX>
Response
Response
Response
Response
Response
31