Setup Mode; Entering The Setup Menu; Navigating The Setup Menu - Brecknell MS140/300 Mode D'emploi

4

Setup Mode

To set up the indicator, you must first enter the appropriate menu mode. The front panel
keys become directional navigators to move around in the menus. See
details.

4.1 Entering the Setup Menu

1.
1a.

4.2 Navigating the Setup Menu

1.
The parameter will be designated in the following format:
PN.x or PNN.xx - P is parameter; N or NN is the parameter number; x or xx is the choice
within the parameter. Refer to
parameter.
2.
Key
MS140/300 User Instructions
Press and hold the [ON/OFF/ZERO] and [UNIT] keys unit setup is displayed.
This indicator offers 19 different setup parameters.
Once setup is displayed, use the [UNIT] key to change the flashed digits
and use the [HOLD/PRINT] key to shift the flashed position.
Use the [TARE] key to confirm the entry, save the data and go to the next
parameter.
Table 4.1 Key Functions in the Setup Mode
Move cursor from right to left.
Scroll selected digit (0 - 9).
Cycles through the parameters.
Confirm parameter choice selection.
Exit from setup mode to normal work mode.
Table 4.2 for parameters and the options for each
Function
Table 4.1 for
15