brennenstuhl SOL ML 1000 Manuel Utilisateur page 9

064520 BA_TwinsPad.qxp
WORK MODES
According to the connection of the lamp body with solar panel, the lamp will automatically
recognize the Constant Lighting Mode, Sensor Mode or Power Bank function.
Mode A: Constant Lighting Mode (Lamp NOT connected with solar panel)
Under this work mode, the PIR sensor & Photocell control will not work.
Mode B: Sensor Mode (Lamp connected with solar panel)
Under this work mode, the lamp will automatically light on at night, and light off at day time.
Mode B2: Press
for 5hrs. After 5hrs or when battery capacity is less than 30%, it turns to Mode B1.
Mode B3: Press 3rd time, it turns off.
Additional powerbank function
22.12.20 12:18
Mode A1: Press
30% constant brightness.
Mode A2: Presss
100% constant brightness.
Mode A3: Presss
Mode B1: Press
to 100% brightness (1100lm) when motion
is detected in range ≦6m and then turns to
5% brightness in 20 seconds of no motion.
2nd time, automatically turns on & remain 100% brightness (1100lm)
USB Output: 5.0V/1.0A
DC-Micro Input: 5.0V/1.0A
Indicator of Battery Capacity: 25%, 50%, 75%, 100%.
ON/OFF/Mode
Seite 9
1st time, it turns on to
2nd time, it turns on to
3rd time, it turns off.
1st time, automatically turns on
D
User Manual
9