Care And Cleaning; Removing Oven Door; Replacing Oven Light - Amana EvenAir ZRRC8000 Serie Mode D'emploi

Care and Cleaning

Removing Oven Door

CAUTION
To avoid damaging oven door, do not lift or move range
by oven door handle. Glass can break.
To avoid personal injury or property damage, handle
oven door with care.
• Door is heavy and can be damaged if dropped.
• Avoid placing hands in hinge area when door is
removed. Hinge can snap closed and pinch hands.
• Do not scratch or chip glass, or twist door. Glass
may break suddenly.
• Replace door glass if damaged.
1. Open door.
2. Remove screws on each side of lower oven door.
3. Close door to first stop.
4. Grasp door firmly on each side and lift upward until
door is off hinges.
• Do not lift door by handle. Glass can break.
• Only push hinges closed once oven door is
removed if necessary. Use both hands when closing
hinge. Hinge snaps closed.

Replacing Oven Light

To avoid risk of burns or electrical shock, disconnect
electrical supply to range before changing light bulb.
• Before replacing light bulb make sure bulb is cool.
• Wear protective gloves.
• Do not operate oven without bulb and cover in
place.
1. Disconnect electrical supply.
2. Remove oven door if desired.
3. Unscrew light bulb cover and then light bulb.
Turn counterclockwise.
4. Replace light bulb with 120 volt, 40 watt appliance
bulb.
• Do not overtighten bulb or light bulb cover. They
may be difficult to remove later.
5. Replace light bulb cover and oven door before use.
6. Reconnect power supply.
22
WARNING