Self-Cleaning; Interrupt Self-Cleaning Cycle; Delayed Self-Cleaning; Canceling Self-Clean Cycle - Amana EvenAir ZRRC8000 Serie Mode D'emploi

Self-Cleaning

CAUTION
To avoid fire or smoke damage, remove any flammable
materials from storage drawer. Items like plastic
containers and paper manuals can melt or burn.
• A small amount of smoke is normal when cleaning.
Excessive smoke may indicate too much food residue
has been left in oven or a faulty gasket.
• Oven should be cleaned before it gets too dirty. Wipe up
large spills before self-cleaning.
• Do not use self-cleaning cycle if oven light cover is not
properly in place.
• Oven light will not work during clean cycle.
1. Remove oven racks and all cooking utensils from
oven. Clean excess spills from oven interior.
2. Press CLEAN pad.
3. Press until desired cleaning time is
or
-
+
displayed. Clean can be set from 2 to 4 hours.
Recommended clean time is 3 hours.
• Oven will begin to clean automatically. "CLEAN",
"LOCK", and "ON" will light in display. As oven door
locks and unlocks "LOCK" will flash in display.
When door is locked, "LOCK" will remain in
display. When cleaning cycle has elapsed, oven
will automatically turn off. End-of-cycle signal will
not sound.
CAUTION
To avoid risk of personal injury do not touch oven vents
or areas around vents during self-cleaning. These
areas can become hot enough to cause burns.
To avoid risk of damage to automatic locking system,
do not try to force oven door open when "LOCK" is
flashing in display. When oven has cooled to a safe
temperature, "LOCK" will disappear from display and
door can be opened. "LOCK" will flash in display while
unlocking.

Interrupt Self-Cleaning Cycle

1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, lock
will disappear from display and door can be opened.

Delayed Self-Cleaning

1. Remove oven racks and all cooking utensils from
oven. Clean excess spills from oven interior.
2. Press CLEAN pad.
3. Press until desired cleaning time is
or
-
+
displayed.
4. Press STOP TIME pad.
5. Press until desired stopping time is
or
-
+
displayed. A starting time will automatically be
calculated based on amount of cleaning time and
stop time.
• "DELAY", "CLEAN", and "LOCK" will light in display.
As oven door locks and unlocks "LOCK" will flash in
display. Oven will begin to clean at preset time and
"ON" will light in display. When cycle is complete
oven will automatically turn off.

Canceling Self-Clean Cycle

1. Press OVEN CANCEL pad.
2. When oven has cooled to a safe temperature, "LOCK"
will disappear from display and door can be opened.
14