Transportation And Storage - Siemens 6DR5 Serie Mode D'emploi

1.2 History
The following table shows the most important changes in the documentation compared to the previous edition.
Edition Comment
03/2011 First edition
01/2013 Revision of the warning information as well as sections "Technical data (Page 34)", "Connecting (Page 12)"
and "Commissioning (Page 23)".
02/2014 Chapter "Technical data (Page 34)"
1.3 Purpose
The electropneumatic positioner is used for the continuous control of process valves with pneumatic drives in the following
industries.
● Chemicals
● Oil and gas
● Energy production
● Food and beverages
● Pulp and paper
● Water/waste water
● Pharmaceutical industry
● Offshore plants
Operate the device according to the specifications in Chapter "Technical data (Page 34)".
For additional information, refer to the operating instructions for the device.
1.4 Checking the consignment
1. Check the packaging and the device for visible damage caused by inappropriate handling during shipping.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for correctness and completeness.
WARNING
Using a damaged or incomplete device
Danger of explosion in hazardous areas.
● Do not use damaged or incomplete devices.
1.5

Transportation and storage

To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, ensure that all shipments are properly packaged to provide sufficient
protection during transport. Siemens cannot assume liability for any costs associated with transportation damages.
4
SIPART PS2 (6DR5...)
A5E03436620-04, 02/2014