EUROM Sani Mirror Wi-Fi Serie Mode D'emploi page 23

Operation
WARNING
Before every use, make sure that:
•
•
•
•
•
CAUTION
When the device is turned on or off, it may emit a sound. This is material
expanding and shrinking during heating and cool-down.
1. Set the ON/OFF switch to the ON position
(Figure 11, pos. 1).
2. The control panel and display (Figure 11, pos.
2) will light up.
3. Press the Plus or Minus button to set the
desired temperature, from 0 °C to 37 °C. The
device starts heating when the set
temperature is higher then the ambient
temperature.
4. The display will first show the set
temperature for 3 seconds followed by the
ambient temperature.
Set the countdown timer
1. Press the Timer button once or multiple times to set the countdown timer, from 00 to 24
in whole hours.
Eurom Smart App
The device can be operated using an app on a smartphone or tablet. The Eurom Smart app
can be used to:
•
switch the device on and off (without anticipation);
•
regulate the temperature;
•
set on and off timer settings daily, on the weekly timer.
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged;
the device is not covered or blocked;
the device is securely mounted.
Figure 11
23