EUROM Sani Mirror Wi-Fi Serie Mode D'emploi page 21

1. Place the device on a non-flammable and
solid wall.
2. Place the device with a minimum distance
(Figure 6) of:
•
50 cm from the ceiling;
•
20 cm from the side walls;
•
10 cm from the floor;
•
50 cm clearance on the front side.
3. Do not mount the device:
•
immediately below a socket outlet;
•
on a ceiling or roof.
4. Place the wall bracket (Figure 7, pos. 1)
against the wall and mark the five holes.
5. Drill five holes at the marked spots.
6. Place plugs (Figure 7, pos. 3).
7. Screw and tighten the wall bracket to the wall
with five large screws (Figure 7, pos. 2) using
a Phillips screwdriver (Figure 7, pos.4).
Figure 8
Figure 6
Figure 7
21