Instructions For The User; Lighting The Burners - M-system MFTW120IX Notice Pour L'installation, L'utilisation Et L'entretien

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

HOB: GENERAL NOTES ON SAFETY
When a gas cooker is being used it produces heat
and humidity in the room where it is installed.
For this reason the room must be well ventilated,
keeping the natural ventilation openings free and
switching on the mechanical aeration system
(suction hood or electric fan, see «VENTILATION
and LOCATION AND AERATION» paragraph )
If the cooker is used for a long time additional
aeration may be necessary, for instance,
opening a window, or a more effective aeration
by increasing the power of the mechanical
system if there is one.

INSTRUCTIONS FOR THE USER

3
4
11

LIGHTING THE BURNERS

Automatic electric ignition of burners
Push lightly the knob corresponding to the burner you
wish to use and turn counterclockwise to the "Full on"
position, then depress the control knob. Automatically
the ignition spark shoots. Matches can be used to light
the burners in a blackout.
Optimum use of the burners
To get the maximum yield with the minimum
consumption of gas it is handy to keep the following
points in mind:
• Once the burner has been lit, adjust the flame
according to your needs.
• Use an appropriately sized pan for each burner (see
the table below and fig. 4).
• When the content of the pan start to boil, turn the
knob down to "Reduced rate position" (small flame).
• Always put a lid on the pan.
• After using the appliance, ensure that all the controls
are in the closed or off position.
Burners
Ultrarapid
Rapid
Semi-rapid
Auxiliary
GB
Ø pan cm
22÷24
20÷22
16÷18
12÷14

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mftw120ixbMftw120ixbe

Table des Matières