Assembling The Harness Straps/Belts And Assembly Of The Wing - Scubapro X-Tek Mode D'emploi

5) Insert the belt throug the D-ring
7) Form a loop and thread the strap back through the
second eye of the belt stopper

Assembling the Harness straps/belts and assembly of the wing:

1) Thread the waist belt through the j rst leash on the
back of your harness
6) Thread the strap through the second eye of the belt
stopper
8) Thread the strap back through the j rst eye of the belt
stopper
9) The loop should look like this now. This loop will be
threaded over the waist belt when donning the BC
2) Thread the belt through the leash on the inner side of
the wing
11