Reverse The Door Swing (De / Ev0041 Models) - Norcold DE 0041 Manuel D'installation

Reverse the door swing (DE / EV0041 models):

This refrigerator has door hinges that allow you to change the direction that the door opens by moving the hinges to the opposite corner.
1. Remove the door (See Art02281 and
Art02282):
- Make sure that the door is fully closed.
- Turn out and save the upper hinge pin
[63].
- Turn out and save the lower hinge pin
[64].
- Carefully open the door and pull it away
from the refrigerator.
Make sure that the plastic
NOTICE
bushings [74] remain in the
door hinges.
2. Change the position of the strike plate and
the strike plate cover (See Art02285):
- Remove the screws [41] that attach the
strike plate (with hole) [65] and the strike
plate cover (without hole) [163].
- Reverse the strike plate and the strike
plate cover and put each one on the other
side of the refrigerator cabinet.
- Attach the strike plate and strike plate cover
with the screws.
3. Change the position of the cabinet hinges
(See Art02281 and Art02282):
- Remove the screws [41] from the upper
cabinet hinge [66].
- Reverse this hinge and put on the other
side of the refrigerator as the lower
cabinet hinge.
- Make sure that the center of the
hinge slots are aligned with the
center of the hinge screw holes in
the refrigerator.
- Attach the cabinet hinge with the
screws.
- Remove the screws [41] from the lower
cabinet hinge [67].
66
41
74
41
63
67
99
64
Art02281
224
87
Art02282
Installation Manual 5