Deleting Inactive Stations; Fm Mode; Switching On Fm Radio Mode; Fm Reception With Rds Information - TechniSat TECHNIRADIO SOLAR Mode D'emploi

7.2.8 Deleting inactive stations

This menu item is for removing old stations and those no longer being received from
the station list.
> Keep the Menu button depressed and use the Next/Prev. button to select the
item [Delete inactive stations].
> Press Select.
This is followed by the [Delete?] prompt asking if the inactive stations are to be
deleted.
> With Next/Prev. select the entry [Yes]and confirm by pressing the Select
button.

8 FM mode

8.1 Switching on FM radio mode

> Switch to FM mode by pressing the Mode button.
> [FM] is shown on the display.
When switching on for the first time, the frequency is set to 87,5 MHz.
If you have already set or saved a station, the radio plays the last station set.
In the case of RDS stations, the station name appears.
Align the telescopic antenna to improve reception (Section 5.3.1).

8.2 FM reception with RDS information

RDS is a procedure for broadcasting additional information via FM stations.
Broadcasters with RDS broadcast their station name or the programme type, for
example. This is shown on the display. The device can show the RDS information RT
(Radio text), PS (Station name), PTY (Programme type).

8.3 Automatic station scan

> Hold down the Next button to automatically search for the next station with
sufficient signal intensity.
If a FM station with sufficient signal intensity is found, the scan stops and the
station is played. If an RDS station is being received, the station name appears
and, possibly, radio text.
Please use the manual station scan for setting weaker stations.

8.4 Manual station scan

> Turn the Next/Prev. button repeatedly to set the desired stations or frequency.
46