Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3 REMOVE REAR BUMPER BEAM
1
Disconnect the RAB harness connector from the top of the bumper beam.
2
Using 14 mm deep socket, remove (2) bolts and (1) nut from each side of the
bumper beam
3
Discard (2) nuts and (2) bolts. Retain (2) bolts for installation of cover panel.
4
Remove the bumper beam.
2
If Trailer Hitch is removed, a bumper beam MUST be reinstalled. Failure to
!
reinstall a bumper beam after removal of the trailer hitch will negatively affect
vehicle rear crash performance. Please contact your SUBARU dealer.
4 REMOVE REAM BUMPER BRACKETS
1
Remove (1) fastener from each LH/RH bumper bracket.
2
Remove the LH & RH bumper brackets.
PART NUMBER
ISSUE
L101SFL000
1
4
2
bumper beam
2
1
DATE
6/26/2017
2
2
2
1
SUBARU OF AMERICA
ratchet
extension
14mm deep socket
flat head screwdriver
PAGE
6
18
OF
Publicité
Table des Matières
