Fein AFSC18Q Serie Mode D'emploi page 16

OBJ_BUCH-0000000363-001.book Page 16 Wednesday, January 30, 2019 10:02 AM
en
16
Mounting application tools (figure 5).
Release the clamping lever and tilt it to the
stop.
Pull out the fastening element.
Clean the tool holder, the application tool and
the fastening element.
Insert the application tool accurately into the
star-shaped tool holder. Pay attention that the
application tool is mounted flush.
Fig. 5
Fastening element
2.
Clamping lever
180°
1.
3.
4.
1.
180°
edges, use cover 3 21 74 011 00 0 to protect
yourself against hand injuries.
Cover
2.
When changing application
CAUTION
tools with sharp cutting
Firmly press in the fastening element to
the stop. Then lock the clamping lever.
Fastening element
4.
Application tool
3.
180°
5.
Fastening element
6.
5.
8.
180°
Cover
7.
Application tool