Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Status
The service indicator shows red. However, the
power tool is in working order.
3.5
Items supplied
Slitting tool, pin wrench, slitting discs, break-out tool, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
4
Technical data
4.1
Slitting tool
For rated voltage, rated current and/or power, line frequency and rated speed, refer to the country-
specific type identification plate.
Weight
Arbor diameter, wheel mount
Thickness of the diamond slitting disc
Diameter of the diamond slitting wheel
4.2
Dimensions and format of suitable diamond slitting wheels
Diamond slitting wheels must meet the following require-
ments in terms of dimensions and format.
Technical data
Slot width between segments
(G)
Cutting angle
5
Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1
Installing diamond slitting discs
Pin wrench
@
Clamping nut
;
*2208336*
Meaning
•
•
≤ 15 mm
Negative
2
=
%
2208336
The carbon brush wear limit has almost been
reached. You can continue working for a number
of hours after the indicator first shows, before
automatic cut-out is activated.
The carbon brushes have been changed and
must be run in by letting the machine run under
no load for at least 1 minute without interruption,
in order to achieve the optimum service life.
16.8 lb
(7.6 kg)
0.87 in
(22.2 mm)
≤ 0.1 in
(≤ 3 mm)
≤ 5.9 in
(≤ 150 mm)
Spacer ring
Diamond slitting wheel
English
7
Publicité
Table des Matières
