Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
Description
3.1
Product overview
3.2
Intended use
The product described is an electrically powered slitting tool for professional use.
It is designed for use with diamond slitting discs.
The machine is designed to be used with a suitable vacuum cleaner.
Optionally, the slitting tool can be combined with a line laser for projecting the line of cut on to the surface
ahead.
3.3
Possible misuse
Do not use the product in environments where there is a risk of explosion.
Use of the product in a damp or wet environment is not permissible.
Do not use the product to work on hazardous or flammable materials (e.g. asbestos, magnesium, wood).
Do not tamper with or attempt to make alterations to the device.
3.4
Service indicator
The slitting tool has an LED service indicator.
Status
The service indicator flashes red. The power tool
cannot be switched on.
The service indicator flashes red. The power tool
runs at reduced speed.
The service indicator shows red. The power tool
cannot be switched on.
6
English
1
On/off switch
@
Vacuum cleaner hose connector
;
Tubular bubble level
=
Plunge movement lockbutton
%
Front grip
&
Carriage
(
Service indicator
)
Rear grip
+
Locking switch for plunge depth
§
Carriage release button
/
Cutting line indicator
:
Spindle lock button
∙
Slitting-depth adjusting knob
$
Interface for DCH-SL LG line laser
£
Meaning
The motor has severely overheated. To restart,
switch the power tool off and wait for 10 minutes.
Then switch on again.
The motor has overheated. Allow the power tool to
run under no load so that it can cool down quickly.
When the power tool has cooled down the ser-
vice indicator goes out and the motor shuts down.
Restart the power tool by switching it off and then
on again.
•
The carbon brushes are worn and have to be
replaced.
•
The power tool is faulty.
2208336
*2208336*
Publicité
Table des Matières
