Super Administrator Setup; First Time Setup; Network Setup - Ip Address Determination - Tripp-Lite NetDirector B064-008-01-IPG Guide De Démarrage Rapide

2. Super Administrator Setup

The B064-Series KVM Switches supports three types of users:
User Type Description
Super Administrators have full access to all Ports and Devices in the KVM installation. They can manage all aspects of the
Super Administrator
installation.
Administrators have access to Ports and Devices that are authorized by the Super Administrator. They can manage Users and
Administrator
Groups and configure their personal working environment.
Users can access Ports and Devices authorized by Super Administrators or Administrators and they can configure their personal
User
working environment.

2.1 First Time Setup

Once the B064-Series KVM Switch has been installed, the Super Administrator must prepare the unit for user operation by setting the
network parameters and adding users.

2.2 Network Setup - IP Address Determination

If you are an administrator logging in for the first time, you must access the B064-Series KVM Switch in order to give it an IP address to
which users can connect. There are three methods of doing this: Local Console, IP Installer, and Browser.
1. Local Console
After the local console has been connected and the B064-Series
KVM Switch is turned on, a login prompt appears on the console
monitor:
Log in using the default Username: administrator and Password:
password.
For security purposes, a "Change Password" prompt will appear
requiring you to immediately change the password from the default.
Please enter the old default password and then a new unique
password in the remaining fields. It is strongly recommended that
you also change the username from the default one (see section
2.4 Changing the Super Administrator Login for instructions).
After you have successfully logged in and changed the password,
the Local Console Main Screen appears:
1. Click the Device Management icon at the top of the screen.
2. On the screen that appears on the right-hand side of the page,
select the Network tab.
4