Method Of Operation - Makita HTR5600 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Method of operation

Use the Hedge Trimmer only in good light and visibility. During cold seasons
beware  of  slippery  or  wet  areas,  ice  and  snow  (risk  of  slipping).   A lways  
ensure a safe footing.
Do not overreach or stand on unstable support. Keep good footing and
balance at all times.
Keep both feet on the ground.
Never stand on a ladder and the Hedge Trimmer.
Never  climb  up  into  trees  to  perform  cutting  operation  with  the  Hedge  
Trimmer.
DANGER-CUT HAZAARD-KEEP HANDS AWAY FROM BLADES.
Don't  feed  twigs  or  other  material  to  be  cut  into  the  blade  with  your  hands  or  
reach over the moving blade to pick up clippings.
Never  grasp  the  exposed  cutting  blades  or  cutting  edges  when  picking  up  or  
holding the tool. CAUTION-­Blade  may  coast  after  its  turned  off.
KEEP HANDS AND ALL PARTS OF BODY AWAY
The  edges  are  sharp  and  can  cause  injury  even  when  the  tool  is  "OFF".
BEFORE TRIMMING
,  inspect  areas  for  wires,  cords,  glass  or  other  foreign  
objects  which  could  come  in  contact  with  the  blade.
Keep  both  hands  on  the  handles  when  operating  a  Hedge  Trimmer.
Never  grasp  exposed  cutting  blades  of  Hedge  Trimmer.
Make sure engine is stopped and blades have stopped moving before
clearing jammed material.
Be  aware  of  any  and  all  electric  lines  and  electric  fences.  Check  all  areas  for  
electrical lines before cutting.
To  reduce  the  risk  of  stumbling  and  loss  of  control,  do  not  walk  backward  
while  operating  the  machine.
Maintenance instructions
Always  stop  the  engine  before  cleaning  or  servicing  the  unit  or  replacing  
parts.
MAINTAIN TOOL WITH CARE.
best  and  safest  performance.  Follow  instructions  for  lubricating  and  proper  
maintenance.
Be  kind  to  the  environment.  Operate  the  Hedge  Trimmer  with  as  little  noise  
and pollution as possible. In particular check the correct adjustment of the
carburetor.
Clean  the  Hedge  Trimmer  at  regular  intervals  and  check  that  all  screws  and  
nuts are securely tightened.
Never  service  or  store  the  Hedge  Trimmer  in  the  vicinity  of  open  flames,  
sparks, etc. (11).
Always  store  the  Hedge  Trimmer  in  a  well-­ventilated  locked  room  and  with  an  
emptied fuel tank out of reach of children.
Observe and follow all relevant accident prevention instructions issued by the trade associations safety board and by insurance
companies.
Do  not  perform  any  modifications  to  the  Hedge  Trimmer  as  this  will  risk  your  safety.
The  performance  of  maintenance  or  repair  work  by  the  user  is  limited  to  those  activities  as  described  in  this  instruction  manual.   A ll  other  work  is  
to  be  done  by  Makita  authorized  or  Factory  Service  Centers.
Use  only  genuine  spare  parts  and  accessories  supplied  by  MAKITA  authorized  or  factory  service  centers.
Use  of  non-­approved  accessories  and  tools  means  increased  risk  of  accidents  and  injuries.  MAKITA  will  not  accept  any  liability  for  accidents  or  
damage  caused  by  the  use  of  any  non-­approved  accessories.
from blade.
Keep cutting edges sharp and clean for
(10)
(11)
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Htr7610

Table des Matières