Storage Of Fuel; Precautions Before Starting - Makita HTR5600 Manuel D'instructions

Refuelling
Always stop the engine and allow it to cool before refuelling.
– Thoroughly clean the around the fuel filler cap to prevent dirt from getting into
the fuel tank.
– Unscrew the fuel filler cap and fill the tank with fuel.
– Tightly screw on the fuel filler cap.
– Clean the fuel filler cap and tank after refuelling!
Wipe up any fuel

Storage of fuel

– Fuel cannot be stored for an unlimited period of time.
– Purchase only the quantity required for a 4 week operation period.
– Use approved fuel storage containers only.
WARNING!
Gasoline is an extremely flammable fuel. Use extreme caution when handling
gasoline or fuel mix. Do not smoke or bring any fire or flame near the fuel.

PRECAUTIONS BEFORE STARTING

– Please make sure that there are no children or other people within a working
range of 15 meters or 50 feet, also pay attention to any animals in the
working vicinity.
– Before use always check that the Hedge Trimmer is safe for operation. Check
the cutting device is not damaged, the control lever for easy action and check
for proper function of the STOP switch.
Rotation of the cutting device during idling speed is not allowed.
Check with your dealer for adjustment if in doubt. Check for clean and dry
handles and test function of the STOP switch.
– Start the Hedge Trimmer only in accordance with the instructions.
Do not use any other methods for starting the engine. (See Starting)
– Start the Hedge Trimmer engine only after the entire assembly is done.
Operation of the engine is only permitted after all the appropriate accessories
are attached. Otherwise there is a risk of injury.
– Before starting, make sure that the cutting device has no contact with objects
such as branches, stones, etc.
– Before trimming, inspect area for wires, cords, glass, or other foreign objects
which could come in contact with the blade.
Electrical shock. Be aware of any and all electric lines and electric fences.
Check all areas for electrical lines before cutting.
Diagrammatic figure
15 meters
9
3 meters
(10 feet)
(50 feet)