Schiller AT-2 Guide De L'utilisateur page 29

General Settings
The defined formats and settings can be checked as follows:
Entry Key Sequence
ALT
A printout of the defined settings will be produced and gives the following information,
depending on the installed software:
Unit designation (AT-2),
Serial number
Leads
ECG Format
MECG
Measurements
Marks
Interpretation
Selected Rhythm leads
Automatic Centering
Printout of signals
CARDIOVIT AT-2
8.2001
Setup Printout
0 1 1 Printout of programmed settings
Software option installed (C = Interpretation) and Software
version
Standard (S) or Cabrera (C)
Long (ooo), Short (o) or Suppressed (-)
Average cycles as defined in auto ECG recording setup (e.g.
4 * 3 (25 mm/s)+2)
Enabled (+) or Suppressed (-)
Enabled (+) or Suppressed (-)
Enabled (+) or Suppressed (-)
Leads selected for R1, R2 resp.
Enabled (+) or Suppressed (-)
Sequential or Simultaneous
Action
Page 13