Myogram Filter - Schiller AT-2 Guide De L'utilisateur

General Settings

Myogram Filter

The Myogram filter suppresses disturbances caused by strong muscle tremor. The cutoff
frequency of the myogram filter is set to 25 or 35 Hz.The myogram filter is switched on and
off manually with the FILT key. Switching on or off can also be programmed as default when
the unit is switched on. When the filter is active, the 'FILTER' lamp on the unit is lit.
Entry Key Sequence
ALT
Confirm the selection by pressing STOP.
An ECG recorded in auto mode is stored unfiltered. It is therefore possible to print the stored
ECG either with or without passing the myogram filter.
Page 18
Myogram Filter
2 Myogram Filter 25 Hz
3 Myogram Filter 35 Hz
Myo. Filt. ON when switching on unit
8
1
(marked on printout with +)
Myo. Filt. OFF when switching on unit
8
(marked on printout with –)
Setting Confirm
Press
STOP
Key
CARDIOVIT AT-2
8.2001