Operating Instructions; Using The System With Ice And Water - Breg VPULSE Mode D'emploi

Operating Instructions

Using the System with Ice and Water

Every VPULSE is quality tested before being sold. When un-packing your new system, it is
normal to find moisture in the VPULSE water reservoir due to the testing.
DO NOT overfill.
DO NOT operate without water.
DO NOT operate with hot water.
1
Remove the two
Ice Bottles from
the container.
3
Pour ice water into
the container until
even with the "ICE"
level indication on
the inside of the
container.
2
Pour cold
water into the
container to
the "WATER"
level indication
on the inside of
the container.
4
Place the lid onto the
container and turn
clockwise until the
handle clicks into
position.
9 of 22