Using The System With Ice Bottles - Breg VPULSE Mode D'emploi

Operating Instructions

Using the System with Ice Bottles

If your VPULSE includes the Ice Bottle pair or you purchased them as an accessory, please follow the
instructions below to prepare the Ice Bottles for use.
1. Fill the Ice Bottle with tap water. Freeze the
filled Ice Bottle for a minimum of 6 hours in any
household freezer to ensure maximum cold
therapy.
The time the Ice Bottle will stay frozen is
approximately 2 to 6 hours. Use additional Ice
Bottles for longer treatment.
Fill Ice Bottles with water only
1
Remove the two Ice
Bottles from the
container.
3
Freeze Ice
Bottles.
To avoid skin irritation or cold burn, DO NOT hold frozen Ice Bottles for an extended period. DO
NOT use the Ice Bottles directly on skin for therapeutic purposes.
5
Place the two Ice Bottles
into the container.
10 of 22
2. Place the frozen Ice Bottle into the container.
Make sure water is already in the VPULSE unit
up to the water line. For longer duration of
sustained cold water temperature, add ice in
addition to the Ice Bottle to the water reservoir
(as desired). Only fill the Ice Bottles with water.
To order additional Ice Bottles please call
1.800.321.0607 or 1.760.795.5440.
2
Fill Ice Bottles
with water.
4
Pour cold water
into the container
to the "WATER"
level indication
on the inside of
the container.
6
Place the lid onto the
container and turn
clockwise until the
handle clicks into
position.