Operating Instructions - Breg POLAR CARE WAVE Mode D'emploi

OPERATING INSTRUCTIONS

Setup with Water and Ice:

Set up and operate unit on a flat surface so the unit does not tip over.
Unlock handle by rotating handle to the front of the unit.

Remove lid and fill container with water to indicated water
fill line.
Fill to lines on label inside container. Use cubed ice for optimal
performance.
Only use ice and water or four (4) Breg Ice Bags and water with
this unit (see page 11 for Setup with Breg Ice Bag Accessories).

CAUTION: Do not overfill the unit with ice and water.
Appropriate levels are indicated by the ice/water label in the
container. Overfilling the unit can cause water to spill out or
prevent the lid from closing properly.

Place lid on container using align stickers.
Lock by rotating the handle to the upright or back position

according to image on handle.
Every 6-8 hours or as needed, pour out enough water to return water level to original water fill

line and re-fill ice to ice line.
10
FIRST ADD WATER
SECOND ADD ICE
Continue to Power Supply instructions on page 11.