Commissioning; Stem Adjustment; Filling The Solution Tank (Optional Accessory) - Cleanfix E50x35 Excenter Mode D'emploi

Stem adjustment

• Pull the angle adjustment lever upwards and hold it.
• Move the operating handle to a comfortable position
(approximately hip height).
• Release the angle adjustment lever again.

Filling the solution tank (optional accessory)

Make sure that the power plug is not plugged in.
Do not fill the solution tank until the stem is in an inclined position to the operator.
Never fill the solution tank in a horizontal position.
Fill the solution tank with clean water at a temperature of no more than 50°C.
Refill the detergent in the concentration and in the manner indicated by the detergent manufacturer on the label.
Unsuitable cleaning agents can be a health hazard and cause damage to the device.
Only use recommended cleaning agents. For other cleaning agents, the operator bears
the increased risk with regard to operational safety and the risk of accidents.
Do not operate the device if the electrical components have become wet!
Correct position for filling
20 |

- COMMISSIONING -

Do not fill the solution tank in these positions