Servicing instructions
The following instructions should be observed:
When cleaning and servicing the machine, replacing parts or when changing over to a different function, switch off the drive and remove
the plug.
The power supply lead must not be damaged by driving over it, crushing, tugging etc.
Check the power supply lead regularly for signs of damage.
The machine must not be used if the power supply lead is not in perfect condition.
When using or replacing the power supply or equipment supply leads, use only those specified by the manufacturer.
When replacing the plug-and-socket connectors of power supply or equipment supply leads, splash protection and mechanical strength
must be assured.
When transporting the machine in lifts, put the stem in a vertical position so that it cannot catch on the lift walls.
Only the spray and cleaning agents suitable for the machine's purpose may be used.
Never use highly flammable, combustible, toxic, health-hazardous, corrosive or irritant substances.
Repairs, including the fitting of spray agent lines and hoses, may only be carried out by approved customer service shops or by special-
ists in this field who are familiar with all the relevant safety regulations.
Storage
When the machine is not being used, store it in a dry place and in normal room conditions (not below +5°C).
To protect the pad holder, swivel the motor head to the vertical position by lifting it by the handle.
CAUTION Never place the motor head on the floor without the pad.
We reserve the right to make changes in the course of technical innovations or improvements!
The packaging material can be recycled. Please do not throw the packaging material into household waste;
please send it for recycling.
Old appliances contain valuable materials that can be recycled; these should be sent for recycling.
Batteries, oil, and similar substances must not enter the environment. Please dispose of your old appliances
using appropriate collection systems.
22 |
- FINAL REMARKS -
- ENVIRONMENTAL PROTECTION -