Technical Specification; Operating; Commissioning / Operation - Cleanfix PowerDisc LS Mode D'emploi

Technical Specification

Technical Specification
Power supply
Brush motor power
Brush speed
Working width
Operating height
Cable length
Weight inclusive brush
with additional weights
Protection class
Noise level
Vibration strength handle
Torque

Commissioning / Operation

Please remember that the voltage in the building being cleaned must concur with that given on the machine's
type plate.
Assembly instructions
 The motor head and bar are supplied separately packed.
 First release the hexagon socket screw in the shaft adjustment unit (9).
 Then feed the bar (6) gently as far as it will go into the shaft adjustment unit (9).
 Align the handle bar (1) parallel with the wheels (10), so that the open side of the housing of the top shaft
element (3) is facing to the rear.
 Then tighten the hexagon socket screws (9) again.
 Wind the electric cable (12) around the handle bar (1) and cable hook (8).
Preparations for use
 Grasp the handle bar (1) with both hands and tip the machine until it is resting on
1
 Then wheel the machine to its place of work and plug the electric cable into the
B A
 Now tip the machine back onto the wheels and push it over the brush (or drive plate)
20
3
2
 Place the single disc machine on the working element (B).
4
2
 Then squeeze the shaft adjustment lever (4) and lower the bar (6) into its working
6
 The accessory automatically engages.
PowerDisc LS
230 V
1200 W
155 /min
1
44 cm
37 cm
12.5 m
30 kg
I/IPX4
55 dBA
<2.5 m/s
2
68 Nm

- OPERATING -

2
both wheels (A).
4
6
power supply. Lay the accessories (20), i.e. brush or drive plate with pad, on the
floor.
until the drive star and brush flange are vertically aligned. Lower the machine onto
the brush.
6
position. Both arms should be extended loosely downwards. Align the machine hori-
zontally above the working element (brush or drive plate), press the switch lock (3)
and press the brush motor switch (2) briefly.
PowerDisc HS PowerDisc HD
230 V
1200 W
410 /min 160
1
44 cm
37 cm
12.5 m
30 kg
I/IPX0
55 dBA
<2.5 m/s <2.5 m/s
2
29 Nm
3
2
230 V
1200 W
/min
1
44 cm
37 cm
12.5 m
43 kg
51 kg
I/IPX4
55 dBA
2
68 Nm
6
English | 15