Safety Warnings - Festool CTM 26 E Notice D'utilisation

English
Contents

1 Safety warnings.........................................16

2 Symbols..................................................... 17
3 Machine features...................................... 17
4 Technical data........................................... 18
5 Intended use..............................................18
6 Commissioning..........................................18
1 Safety warnings
WARNING! Read all safety warnings, instructions, illustrations and speci­
fications provided with this power tool. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
- This machine must not be used by persons (including children) with re­
duced physical, sensory or mental capabilities, or lack of experience
and knowledge. Children need to be supervised to ensure they do not
play with the machine.
- WARNING! The machine may contain hazardous dust. Only have the
machine maintained and emptied, and only have the filter replaced by
an authorised specialist using suitable protective equipment.
- Always operate with the filter system installed.
- Always use suitable protective equipment.
- If intact following a visual inspection, work in a dry environment accord­
ing to instructions.
WARNING! When extracting dust that exceeds the limit value or large vol­
umes of oak or beechwood dust, only extract from one dust source (power
or compressed-air tool).
- Risk of explosion and fire! Do not extract:
- Sparks, glowing parts or hot dust;
- Combustible or explosive materials (e.g. magnesium, aluminium, pet­
rol, diluting agents - with the exception of wood);
- Aggressive materials (e.g. acid, alkaline solutions, solvents);
- Chemically reactive materials, which lead to the generation of heat,
acids/bases, gases, etc. (e.g. reactive two-component materials, alu­
minium and water).
- Observe all national safety regulations as well as the material manufac­
turer's specifications.
- Only use the electrical outlet module on the machine for its stated pur­
pose.
16
7 Settings......................................................19
8 Working..................................................... 20
9 Service and maintenance..........................22
10 Accessories............................................... 22
11 Environment.............................................. 23
12 General information.................................. 23