Publicité
reseeable high or low speed impacts.
However, for maximum protection,
the helmet must be of proper fit and
the chin strap must be securely fas-
tened as described in this manual.
Failure to have a proper fit and to se-
curely fasten the chin strap is dange-
rous, as the helmet could come off in
an accident, resulting in severe head
injury or death.
with a double-D-ring chin strap. Pro-
per use of the chin strap is critical for
proper performance of the helmet.
never alter your chin strap in any
way. For example, never add holes,
cut or apply buttons, studs or other
items to your chin strap. During the
life of your
chin strap never suffers any type
abrasion or cut, and that its total
length does not change. If it does,
replace your helmet.
we strongly recommend that you
fasten your chin strap before putting
on your gloves, in order to make sure
that the fastening within the double-
D-ring is correct.
4
RSR2 DOT-V03.indd 4
WARNING: No helmet can
protect the wearer from all fo-
CHIN STRAP
Your helmet is equipped
helmet, be sure that the
1. slide the longest part of the strap
through both rings, while checking
that the comfort padding is positio-
ned between the strap and your neck.
see figure a.
2. loop the end of the chin strap back
over the end of the outer D-ring and
pass it back through the inner D-ring.
see figure B.
3. Pull the end of the strap until the
chin strap is tight. The chin strap
should be positioned against your
neck, not under your chin, and should
be as tight as possible while not cau-
sing pain or interference with your
breathing.
see figure C.
4. slide the free end of the strap into
the strap loop in order to prevent the
strap from fluttering in the wind.
see figure D.
never
lend
of
others
without
use
of
the
strap in accordance with these
instructions.
your
helmet
to
insuring
proper
double-D-ring
chin
11/04/06 18:51:44
Publicité
