Mounting On The Roof - Megasat Campingman Kompakt Mode D'emploi

9. Mounting on the roof

Before installation make sure that all required parts and tools are available!
1
NOTE: The following items are not be included:
Insulating tape, drill bits, special glue, power drill, cleaning cloth
1
Clean the surface and the mounting feeds with
cleaner.
3
Affix the tape at a distance of 4 mm to the moun-
ting plate.
14
3
2
4
7
5
6
2
Place the antenna to the desired position on the
roof of the vehicle.
4
Place the antenna to the side and distribute the
special glue serpentine within the bordered area.
ENGLISH
1. Installation kit
11x M4 x 20
2x M4 x 16
1x Cable gland
1x Vehicle power cable
2. Roof outlet
3. Insulating tape
4. 2 mm / 15 mm drill bits
5. Special glue
6. Power drill
7. Cleaning cloth
FRONT