Mounting On The Roof - Megasat Countryman GPS plus Mode D'emploi

8. Mounting on the roof

Make sure that all the required parts and tools are available before installation:
1. Special adhesives
2. Signal cable (7m)
3. Allen key
4. Control unit holder
5. Controller cable (7m)
6. Control unit and cable (1,5m)
7. Friction tape
8. M6 × 15 (8), M4 × 20 (14)
1
Clean the surface with cleaner.
3
Attach friction tape outside of the mounting
plate by 5mm away from the plate edges.
9. Mounting plate
10. Cigarette lighter adaptor
11. Cleaner
12. Drill
13. 2 mm drill, 25 mm drill
14. Gland
15. Roof outlet
3 holes
Direction of travel
2
FRONT
Locate mounting plate in the centre of the
vehicle roof.
4
Put aside the mounting plate to apply silicone within the
attached tape line but leave 2cm inward gap from the line.
ENGLISH
13