Switching Between Satellites; Back To Basic Position; Gps Status Indicator - Megasat Campingman Kompakt Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4. Operation and Usage

4.4 Switching between satellites

Function
Description

4.5 Back to Basic position

Function
Description

4.6 GPS status indicator

Function
Description
Choose satellite
(up/down)
OK button
Standby button
GPS indicator
ENGLISH
Operation
If you want to change desired satellite, you can change
the target satellite using the "Up/Down" buttons, then
press the "OK" button to select the new satellite.
Operation
Whenever you wish to return the antenna back to basic
position, press and hold the Standby button for a few
seconds.
Operation
GPS LED confirms the current location from 24 GPS satelli-
tes in the world.
If the Campingman Komapkt a GPS signal identifies the
LED light illuminates irrespective of whether the antenna
is paused or moving. GPS can help to find a satellite faster
because the current position is set before the search
process.
Also, while program updating, the GPS LED light will flash
to show the update procedure is processing. During this
time, GPS LED light on doesn't mean the unit is communi-
cating with GPS satellite.
09

Publicité

Table des Matières
loading

Table des Matières