9. Mounting on the roof
13
The parts needed to install the roof outlet.
15
Position the roof outlet center behind the anten-
na (about 30 cm away). The open side of the roof
outlet must point toward the antenna. Then stick
the tape around at a distance of 4 mm.
17
Drag the two cables (cable for the controller and
cable for the set-top box) through the hole.
16
14
Route the cables as shown here.
16
Drill a 15 mm hole centered inside the tag.
18
Place the roof outlet at the specified position and
drill the 3 holes (2 mm).
ENGLISH