EWT Multicool Manuel D'utilisation page 11

DE
the
SPECIFICATIONS
d as
Model
ot go
EAN code
Power
the
Air flow
n to
Water tank
Ice box
Filters
the
LED indicators
water
Remote control
ll be
Modes
as a
Oscillation
Tilt
Timer
lling
Integrated handle
Wheels
over
Voltage
ated
Frequency
Product dimensions (WxDxH)
water
Produit weight
make
efore
INSTRUCTIONS OF USE
water
BEFORE USING APPLIANCE FOR THE FIRST TIME
1. Please read these instructions carefully before using the appliance
nce,
and keep them for future use.
icity
2. Check that the voltage of your local electricity network complies
with the one which appears on the appliance.
ause
3. Before using the appliance for the first time, remove the appliance's
protective films, stickers or any advertising elements.
mum
other
heck
APPLIANCE ON/OFF
Press this button
MIN"
will be emitted.
When the appliance is switched on for the first time, the default mode
the will be normal ventilation
the LED indicator lights.
Press this button
mode..
SPEED CONTROL
Press this button
appliance.
The sequence will be as follows:
Low speed ➔ Medium speed
(...)
The LED indicator light will display the selected speed.
TIMER
Press this button
show whether the timer is set to stop the appliance after 1 hour, 2
hours, 4 hours or 8 hours. If the timer has not been activated, there
Multicool_A4.indd 11 Multicool_A4.indd 11
3 046 171 904 720
Yes – Anti-dust,
H O et Aroma diffuser foam
2
Yes – Battery CR2032
Yes – Normal, Natural, Night
Yes – Automatic
W26 x D34 x H72 cm
to switch the appliance on. An audible "beep"
at low speed - this will be indicated by
again to switch the appliance onto standby
in order to control the ventilation speed of the
➔ High speed
to activate the timer. The LED indicator light will
will be no LED indicator light on the timer.
MULTICOOL
OSCILLATION ON/OFF
When the appliance is switched on, press this button
45 W
automatic horizontal oscillation. Press it again to switch oscillation
6,5 m/s
off.
Yes – 5,5 L
Fan blades of vertical oscillation can be tilted manually.
Yes – 2
MODE CONTROL
When the appliance is switched on for the first time, the default
Yes
ventilation mode will be set to Normal
Press this button
The LED indicator light will show whether the ventilation is activated
in Normal
Yes – Manual
8H
Normal mode: The ventilation speed selected (low, medium or
Yes
high) will remain constant. .
Yes
220 - 240 V~
Natural mode: When this mode is activated, ventilation speed will
50 Hz
alter to provide a similar effect as a natural breeze.
Select Low ventilation speed for a Natural ventilation mode with a
4.9 kg
soft breeze.
Select Medium ventilation speed for a Natural ventilation mode with
a medium breeze.
Select High ventilation speed for a Natural ventilation mode with a
strong breeze.
Night mode: When this mode is activated, the appliance will firstly
operate at the selected speed. Ventilation speed will then slow down
every 30 minutes before operating at low speed until the appliance is
switched off manually or automatically via the timer function.
The LED display lights will alter as the speed decreases.
Note: When the appliance is switched on, the brightness of the LED
indicator lights will be dimmed after 60 seconds if no other buttons
are pressed. Maximum brightness will be restored when a button is
pressed again.
Note: The appliance will memorise the use settings. When the
appliance is switched on, the ventilation settings chosen when it
was previously switched off will be applied again (except with Timer
function and Night Mode).
If you switch the appliance on after having unplugged the electricity
cable or after a power cut, the appliance will apply the default settings
when switched on – Low Speed and Normal ventilation mode.
COOLER MODE
Press this button
button again to switch this function off.
Note: When this mode is activated, the pump in the appliance will
stop automatically when it has been operating for 10 hours.
➔ Low speed Filter drying mode
Press the speed control button
High Speed icon
start up.
This operation lasts for 20 minutes and for this period only the On/Off
button will be active. All of the other buttons will be deactivated.
After 20 minutes, the appliance will automatically go into standby
mode.
.
to change the appliance's ventilation mode.
, Natural or Night mode.
to switch on the Cooler function. Press the
for approximately 3 seconds. The
will flash three times and filter drying mode will
FR EN DE
to activate
11
20/11/19 10:19 20/11/19 10:19