During Operation - Wetrok Discomatic Samba XT Mode D'emploi

Commissioning
1
Fill up fresh water tank with
water and chemicals.
3
3A
Press main switch.
3C
Switch on water.
(illuminates only when operating
lever is activated).
4
Adjust fresh water dosing
(normal 45° / maximal if horizontally).
Lower suction nozzle.
5.2

During operation

• When machine is stopped, the brush set must be switched off immediately to prevent any damage to floor coverings.
• Attach brushes, pads and other accessories only as directed by the illustrated operating manual.
Machine in motion and moving parts
• The drive motion and the vicinity of rotating brushes/pads pose a risk of injury.
• Do not grasp brush/pads or wheels with your hands or place your feet in this zone.
• Do not allow machine to come into contact with items of clothing, jewellery or hair.
• Ensure that no cables, ropes or similar are picked up and reeled in by the running brush unit.
2
Position pole correctly using the
lower right lever. Recommended
tilt approx. 45°.
3B
Switch on suction turbine.
5
Start machine by pressing and
holding left or right operating
lever.
37
EN