Publicité
0x04
Field
Byte count
Registers values
Answer format in case of error:
Field
Error code
Write multiple registers request
This request can be used to update parameters in EEPROM. Available address and data are fully described in chapter
Request format:
Command
0x10
Field
Starting address
Qty of registers
Byte count
Registers
Toute information contenue dans ce document est susceptible d'être soumise aux règles de contrôle des exportations européennes, américaines ou de tout autre pays. Il est de la responsabilité du destinataire de ce
document de s'assurer que le transfert ou l'utilisation des données qu'il contient est conforme à toutes les règles de contrôle des exportations en vigueur.
Information contained in this document may be subject to Export Control Regulations of the European Union, USA or other countries. Each recipient of this document is responsible for ensuring that transfer or use of any
information contained in this document complies with all relevant Export Control Regulations.
Meggitt (Sensorex) se réserve le droit de modifier la présente notice sans préavis/ Meggitt (Sensorex) reserves the right to change the specification without any prior notice
NOTICE D'INSTRUCTION / INSTRUCTION MANUAL
NOT043045InterfaceProductB0
1 byte
Description
Byte number of field « Registers values ». Is equal to 2 * « Qty of registers »
RAM registers values. Is transmitted MSB first.
Command
0x84
Description
0x01, 0x02, 0x03 or 0x04
Starting
Qty of register
address
2 bytes
2 bytes
Description
EEPROM address to write (32bits aligned)
Number of registers to write. Should be even. This field should be between
2 and 122.
Is equal to 2 * « Qty of register»
Values to write in EEPROM. Are transmitted MSB first.
(Qty of register) *
2 bytes
Error code
CRC
1 byte
2 bytes
Byte count
1 byte
2 bytes
Registers
CRC
Qty of register *
2 bytes
2 bytes
5 .
- 42 -
Publicité
