Publicité
Restore Factory Settings request
This request restore the default settings. All user parameters are reset by this request.
Request format:
Field
Key
Answer format in case of success:
Answer format in case of error:
Field
Error code
Continuous Frame Output request
This request sets the product to master mode. In master mode, the product will continuously deliver the frame described
in Table 4. The frame period can be parameterized with « Rs485FramePeriodUser » EEPROM data.
Request format:
Toute information contenue dans ce document est susceptible d'être soumise aux règles de contrôle des exportations européennes, américaines ou de tout autre pays. Il est de la responsabilité du destinataire de ce
document de s'assurer que le transfert ou l'utilisation des données qu'il contient est conforme à toutes les règles de contrôle des exportations en vigueur.
Information contained in this document may be subject to Export Control Regulations of the European Union, USA or other countries. Each recipient of this document is responsible for ensuring that transfer or use of any
information contained in this document complies with all relevant Export Control Regulations.
Meggitt (Sensorex) se réserve le droit de modifier la présente notice sans préavis/ Meggitt (Sensorex) reserves the right to change the specification without any prior notice
NOTICE D'INSTRUCTION / INSTRUCTION MANUAL
NOT043045InterfaceProductB0
Command
0x46
Description
This field should be equal to:
0xFF00FF00FF00FF00
Command
0x46
Command
0xC6
Description
0x01 or 0x03
Command
0x66
Key
CRC
8 bytes
2 bytes
CRC
2 bytes
Error code
CRC
1 byte
2 bytes
CRC
2 bytes
- 47 -
Publicité
