Publicité
TROUBLESHOOTING
EN
1. No light on the bu on.
2. No co ee.
3. Co ee is not hot enough.
4. Unusual co ee flow.
5. Water leakage.
6. Capsule is not ejecting correctly.
7. Co ee leakage.
8. Machine turns to "OFF" mode.
9. Co ee grounds in the cup.
28
ASSISTANCE VIDEOS ARE AVAILABLE ON
WWW.NESPRESSO.COM VISIT "MACHINES" SECTION
The machine has turned "OFF" automatically; push the bu on to turn the machine "ON".
Check the mains, voltage, and fuse.
Check that the light on the bu on is GREEN.
Check that the water tank is filled and is well positioned.
Check that a fresh capsule is inserted in correct position, that the machine head is closed and push the bu on
to start.
Descale if necessary.
Open the machine head and let the capsule be ejected. Then perform a cleaning as per cleaning section.
Preheat cup with hot drinking water from the tap.
Descale if necessary.
Check that the water tank is well positioned.
Open the machine head and let the capsule be ejected. Then perform a cleaning as per cleaning section.
Descale if necessary.
Check that the water tank is well positioned.
Empty and clean the capsule container.
If problem persists, call the Nespresso Club.
Open the machine head. Remove the power cord from the grid. Clean
the metallic clamps with precaution. Be careful of the sharp edges in the
machine head.
If problem persists, call the Nespresso Club.
Open the machine head and let the capsule be ejected. Then perform a cleaning.
Empty and clean the cup support.
Descale if necessary.
If problem persists, call the Nespresso Club.
To save energy the machine will turn o a er 9 minutes of non-use.
See paragraph on "Energy Saving Concept".
Start the cleaning procedure. See paragraph on "Cleaning".
Publicité
Chapitres
